Rotary Cellphone Kit
Open Source Portable Wireless Electronic Digital Rotary Telephone
I've been getting so many requests from people wanting to buy the rotary cellphone described here that I've decided to make it available in a minimal kit form. Builders will still need to find the right rotary dial and order a handful of other bits, shown below, but the "hard part" (the mainboard and the 3D printed casing with threaded inserts and buttons shown above) is available for sale here. I'm also working on offering of a complete kit that doesn't require any soldering.
Includes only what's shown above:
ATmega2560v-based Cellphone mainboard
3D printed enclosure and buttons (choice of two colors)
Build instructions: The primary assembly guide for this kit.
Video: A supplement in case nuances were missed in the build instructions.
Forum: Post quesions here for public discussion with the community.
Open Source Design Files:
Firmware: Maintained on GitHub.
Kicad Files: The electrical design files.
Mechanical Files: Kept at the Thingiverse.
CURRENT LEAD TIME 12 WEEKS
(Due to COVID-19 outbreak)
3D Printed Enclosure w/ Buttons
CURRENT LEAD TIME 12 WEEKS
READ BEFORE BUYING
This is a DIY project:
Some soldering is still required, as two of the Afafruit components come with the headers disassembled, and both of them have special notes detailed in the build instructions. Most oddly, the header for the FONA 3G needs to be soldered on at an angle and the black backing strip needs to be removed. This is actually pretty easy, and the trick is described in the build notes.
The builder must supply the following components:
-A Western Electric model 10A rotary dial, described here and available in certain Trimline rotary telephones.
-Adafruit FONA 3G (American version) or FONA 3G (European version)
-Adafruit eInk Breakout Friend here
-The Good Display GDEW0213I5F 2.13" flexible ePaper display, which Adafruit sells here
-1.2Ah Lipo Battery w/ JST connector, available from Adafruit here
-Quad-band GSM Antenna w/ SMA connector, which Adafruit has here
-SMA Bulkhead Connector w/µFL pigtail, which Adafruit has here
-A compatible 3G SIM card. In the US, this one from AT&T works
Important notes on expectations, features, and quirks:
Builders must bear in mind that I never intended this phone to be something other people would use. There are certain quirks that I'm well aware of from an engineering perspective but which might cause significant trouble for an unknowing end-user, and these issues are summarized here. If you can live with these, than by all means click the "buy" button:
This is a 3G phone and in the US, AT&T plans to shut down their 3G network in 2022. I'm working in a 4G version, POSSIBLY with a backwards compatible upgrade module for this kit.
Currently, battery and signal strength metering is not working. I hope to have this fixeed in firmware soon, but this further complicates the above quirk. If you have a voltmeter, it's easy to probe battery voltage without opening the case vai the ICSP header on the back
Currently, incomming call identification is not working. I hope to have this fixed in the firmware soon.
There's an odd bug right now where I can only set call volume or ring volume once after powering the phone on. This is probably a silly mistake in the firmware and I should have it fixed soon.
Another annoying thing is that it's stuck with a single ringtone. Again, I hope to have a fix worked out in firmware at some point.
Your contacts list must be coded directly into the Arduino sketch
The ePaper display isn't installed/bonded just right, it's likely to develop display artifacts. In fact some artifcating is likely even in the best case
An in-system programmer is required to upload Arduino sketches, as I didn't include a reset line from the UART pins. But I feel this is actually easier to use than a regular USB cable because if the board isn't totally dead it always just works. I use an Olimex brand AVR-ISP-MK2, available from Digi-Key for about $20.
Sky's Edge is a subsidiary of Lightsmith Scientific LLC. Wait, why? Because when I first decided to start a company I decided on the name Lightsmith Scientific and formed it as an LLC. A few years later I thought of Sky's Edge, which comes from an Alastair Reynolds book, and liked it much better. So on paper Lightsmith Scientific has a "DBA" in NY state for doing business as Sky's Edge.